Moe recently used her farm's goose-neck trailer to haul a load of heat-sheet to a customer. Here is what I learned to package it successfully.
- Stack bundles snugly against each other. This creates less wiggle room and a better hauling experience for the driver and the heat-sheet.
- Keep all the ratchet straps tied on the driver's side. This way the driver can see how they are doing with just a glance and can quickly tell if one comes loose.
- When you are done ratcheting the strap, fold it neatly and stick it in a loop created at the ratchet.
- Put an edgepiece (Moe used both wood corners and cardboard corners) at every edge or corner contact between the strap and the heat-sheet bundle. This reduces damage to the heat-sheet. The long wood corners were quickly constructed by screwing two boards at 90 degrees to each other.
- Drive slow and cautiously, remembering that pulling a trailer increases stopping time and distance.
1 comment
Excellent overview of what goes into preparing a site before new home construction. I like how the article walks through each stage, from site assessment and tree removal to debris cleanup and environmental responsibility. The real-world example also helps readers understand the value of careful planning and professional equipment. A well-executed land clearing project truly sets the foundation for a safer, smoother, and more efficient build.