Indoor condensing tankless gas water heater to use with the HUG Hydronics in-floor heating system
HUG Hydronics Gas On Demand Heater Installation instructions. 1. Moutn the heater 1 to 2 feet above the tank, ideally. 2. Refer to the install manual for installation details. 3. Connect the 2 brass fittings provided with the heater. 4. Connect the heater hoses from the HUG Hydronics tank to the heater using the clamps  provided. 5. Fora  dedicated on- demand gas heater, an overflow conenction may be required on the tank to demonstrate open system conditions.
  • Load image into Gallery viewer, Indoor condensing tankless gas water heater to use with the HUG Hydronics in-floor heating system
  • Load image into Gallery viewer, HUG Hydronics Gas On Demand Heater Installation instructions. 1. Moutn the heater 1 to 2 feet above the tank, ideally. 2. Refer to the install manual for installation details. 3. Connect the 2 brass fittings provided with the heater. 4. Connect the heater hoses from the HUG Hydronics tank to the heater using the clamps  provided. 5. Fora  dedicated on- demand gas heater, an overflow conenction may be required on the tank to demonstrate open system conditions.

TANKLESS WATER HEATER CONDENSING INDOOR 120,000 BTU Natural Gas

Regular price
$1,300.00
Sale price
$1,300.00
Regular price
Sold out
Unit price
per 

State Water Heaters Model # GTS-140-NIH 

Works seamlessly with the HUG Hydronics in-floor heating system.

The 140 Series offers high-efficiency Ultra-Low NOx condensing technology allowing for the use of 3” PVC venting and has 0” clearance to combustibles. Remote control included as a standard feature. Indoor models are certified up to 10,100 ft. altitude. Provides a variety of installation options: indoor, outdoor and direct vent. Complies with Ultra-Low NOx regulations and meets the energy efficiency requirements of ASHRAE 90.1b-1992.

The GTS-140-NIH tankless water heater uses up to 120,000 BTU/h of natural gas to deliver a max flow rate of 6.6 GPM. It utilizes condensing technology to achieve a Uniform Energy Factor of 0.90, and is ENERGY STAR qualified. This model meets Low NOx emission requirements and comes with a 15-year limited warranty.

For help knowing which heater for the HUG Hydronics in-floor heating system may be right for you, try our Selection Guide. The size you will need for your water heater will depend on several factors such as floor space and the amount of heat needed to keep your home/building warm. The Selection Guide. will walk you through these questions and run the calculations for you.

Gas Heater Instructions for installing with the HUG Hydronics in-floor heating unit